
Heat Transfer Experts
Gadsden, AL 35904
1-800-223-4299
fax (256) 546-4614
Accessories
1100ST - Surge Tank for Peterbilt CB 1100R Radiators
View Full DetailsThis is a steel surge tank (top tank) for our Peterbilt radiator 1100R.
Designed for the following vehicles and equipment:
- Peterbilt
Competitor Part Numbers | |||
---|---|---|---|
HDC010446 | 1720006 |
Additional Details | |
---|---|
Related Products | CB 1100R - Copper/Brass Peterbilt Radiator with Surge Tank |
19216 Polished Radiator Cap
View Full DetailsSale Price: $24.95
Polished Radiator Cap for a 16 lbs. closed system.
Chevrolet Polished Radiator cap for a 16 lbs. closed system.
V8 Polished Radiator Cap 16 lbs. closed system.
BCD 28847-1 - Replacement Grommet for PT 7157CP and PT 7157CD
View Full DetailsSale Price: $35.00
This replacement grommet is required for PT 7157CP and PT 7157CD Freightliner truck radiators. In order to activate the warranty on these two radiators, you must replace the existing grommets with this.
BT 001 - Inline Aluminum Temperature Sensor Splicer
View Full DetailsThis is an aluminum inline temperature sensor splicer with a 3/8 inch bung. Available in 1.25, 1.375, 1.50, and 1.75 inch.
BT 002 - Inline Aluminum Filler Neck Assembly
View Full DetailsAluminum filler neck with 1.75 inch hose connections. Various sizes available.
Replacement surge tank for our CB 1105R Copper-Brass and BT 1105R ST Freightliner radiators and other similar radiators.
Designed for the following vehicles and equipment:
- Freightliner
Related Products | ||
---|---|---|
CB 1105R - Copper/Brass Freightliner Radiator | BT 1105R ST - Freightliner Radiator |
Matching OEM's | |||
---|---|---|---|
A0512957000 | A0515799000 |
Competitor Part Numbers | |||
---|---|---|---|
HDK010153 | 237026 |
Designed for the following vehicles and equipment:
- Ford Model T
Additional Info
This is a replacement brass filler neck for a Ford Model T.
Additional Info
This is a replacement chrome filler neck for a Ford Model T.
BT 125200 - Aluminum Weld-on Radiator Neck - 1.25 x 2.00
View Full DetailsAdditional Details | |
---|---|
Construction Material | Aluminum |
BT 138200 - 1.375 x 2.00 Aluminum Weld on Radiator Neck
View Full DetailsSale Price: $4.75
Additional Details | |
---|---|
Construction Material | Aluminum |
BT 150200 - Aluminum Weld-on Radiator Neck - 1.50 x 2.00
View Full DetailsAdditional Details | |
---|---|
Construction Material | Aluminum |
BT 175200 - Aluminum Weld-on Radiator Neck - 1.75 x 2.00
View Full DetailsAdditional Details | |
---|---|
Construction Material | Aluminum |
BT 200200 - Aluminum Weld-on Radiator Neck - 2.00 x 2.00
View Full DetailsAdditional Details | |
---|---|
Construction Material | Aluminum |
BT 225150 - Aluminum Ford Filler Neck for Screw on Cap
View Full Details 2.25 inch by 1.50 inch filler neck.
Additional Details | |
---|---|
Construction Material | Aluminum |
BT 250250 - Aluminum Weld on Bell Neck
View Full Details 2.50 inch by 2.50 inch bell neck.
Additional Details | |
---|---|
Construction Material | Aluminum |
BT 250400 - Oval Aluminum Weld on Neck
View Full DetailsNeck tapers from 2.50 inch to 3.00 inch and is 4.00 inches long.
Additional Details | |
---|---|
Construction Material | Aluminum |
BT 262520 - Aluminum GM Filler Neck for Screw on Cap
View Full Details 2.625 inch by 2.00 inch filler neck.
Additional Details | |
---|---|
Construction Material | Aluminum |
This is a weld-in 2.3 inch O.D. interlocking neck.
I have never had a bad experience with C, G, & J Inc in 40 years , from street rods to Church Buses they are truly professionals. I highly recommend them!
Custom Manufacturing: Marine Circular Charge Air Cooler What do you do when presented with a non-standard cooler design? For us, the answer is simple. You create a comparable design and build it. That's what we did when contacted about an all aluminum replacement charge air cooler for a boat. Read more
Our Copper-Brass Manufacturing Capabilities Over the past couple of years we have brought our heat exchange expertise to copper-brass radiators and are now expanding our copper-brass capabilities again this year. We get a lot of questions regarding what we can do, so let's answer those questions today. Read more
Why Buy an Aluminum Core Instead of the Whole Unit We get a lot of questions about why you might want to get just an aluminum core for a radiator, oil cooler, or charge air cooler instead of the full unit. The answer really depends on what your needs are, so let's discuss some of the reasons why. Read more
Wishing Jerry a Happy Retirement The C, G & J, Inc. and Brice Thomas Radiator family would like to wish a fond farewell to owner Jerry Guyton who recently announced that he would be retiring at the end of this year. He has been around for a long time and it was tough for him to decide to go. Read more
What it Means to Re-core a Heat Exchanger We get a lot of questions about what it means to re-core a heat exchanger. It's a simple process that provides you with a like new unit while saving you money. Let's look at the difference between a new unit and a re-core. Read more